2022 wholesale price Drum Dyeing Machine - TSL-600A Series High Temperature High Pressure Overflow Rapid Dyeing Machine – TRUTECH

Product Features

● Low tension: lifting controlled by frequency invertor and assists the movement of fabric.
● Fabric relaxed and coloring evenly.
● Overflow and water flow can be chosen, soft water flow make sure fabric not fray out and creasing.
● More environmental: lower water consumption and discharge, energy saving.

Technical Data

● Liquor ratio: 1:5-6
● Maximum velocity of the fabric: 200-340m/min depending on different machine type
● Maximum working temperature: 135 °C
● Maximum working pressure: 0.35Mpa
● Heating rate: 5°C/min in average within the range of 20°C-100°C, 2.5°C/min in average within the range of 100°C-135°C (the average pressure of dry saturated steam is 0.7Mpa)
● Cooling rate: 2.5°C/min in average within the range of 135°C-60°C (the cooling water is at 0.3Mpa, 25°C)

Standard Composition

● All parts of machine body contacting with dyeing solution are made of high corrosion-resistant stainless steel.
● High efficiency circulation nozzles.
● Lifter wheel powered by frequency invertor-controlled motor.
● 0 Fabric unload device powered by frequency invertor.
● Spray flush system inside.
● Automatic temperature-controlled system and quick increase and release pressure system for machine body.
● High efficiency stainless main centrifugal pump controlled with soft start.
● Feeding device with a charging pump, valves and agitation.
● Service door with fasten bolt and high efficiency tube-array heat-exchanger (including two filters).
● Frequency programmable computer.
● Working platform with fiberglass reinforced plastic grating.

Optional Setup

● Programmable secondary water injection and draining.
● Quota feeding system.
● Proportional heating and cooling.
● Programmable quota water injection.
● Heat recycling system.
● Fabric seam detector.

Technical parameters

Storage & Transportation