Fiber Dyeing Machine
-
B061-B062 Flat Screen Dryer & R456 Rotary Screen Dryer
The machine is used for drying loose materials such as wool, cotton, chemical fiber, etc. in technological process as well as raw materials like linen, cotton and chemical fiber after being dehydrated.
-
TB Garneting Machine
This equipment is used for synchronously feeding the cotton in a double-station, to large extent to improve the producing efficiency and to economize the production cost.
-
TCO Hydro Extractor Machine
● Suitable for extracting of hank yarns, woven textiles. knits. skeins. piece goods.etc.at high performance with minimum consumption of energy and time.
● High quality stainless steel inner drum and outer basket for long service time.
● The inner drum features rim, suitable for manual loading and unloading.
-
TDB Cake Tipping Machine
It is used to tip out the dyed or bleached fiber cake from the carrier without changing the formation and to be prepared for the following opening process.
-
TSC Normal Temperature Loose Fiber Dyeing Machine
● Mainly applicable for scouring, bleaching, dyeing and mellow finishing of various natural or artificial bulk fibers like cotton, acrylic, wool, cashmere, etc.
● Specially designed high performance, low power consumption axial flow circulating pump.
● Stainless steel coil heater fitted in cylinder.
● Easily operating false bottom sarong.
● All-pass discharge valve shortening operating period.
● Low bath ratio ≈ 1:4. -
TSC-D Normal Temperature Loose Fiber Dyeing Machine
● Product specification 1kg-1200kg
● For wool dyeing, liquor ratio 1:6-8
● For cotton dyeing, the maximum capacity of 1200kg, liquor ratio 1:3.8. -
TSC-ZY Loose Fiber Dyeing Machine
The device is designed for cheese or loose/muff carrier. It can automatically press and tighten the cheese or loose/muff carrier unlike previous manual tightening devices.
-
TSK Wet Garneting Machine & WG Feeding Machine
It is used to loosen the fiber evenly for drying process.
It is used to loosen and feed the fiber into the dryer evenly.
-
TYK Wet Fiber Garneting Machine & W Hydraulic Cake Presser
It is used to pre-open the fiber cake (Water Content 40%-60%) into loose fiber formation and evenly feed into the following drying process.
This equipment is used to press and moisture the loose fiber into cake formation at certain density and size in order to be ready for the dyeing process.
Main: W-300, W-250, W-200, W-150, W-100. -
YKN Hydraulic Baling Machine
Hydraulic four-open door, single-side wire feed, can be added with outer wrapper while compressing bags, fast speed of packing, is a special type for velveteen, economical and practical, easy maintenance, and fine appearance.
