Reactive dye fixing agent FS

Short Description:

This product is a high-performance fixing agent for reactive dyes composed of the main components of cationic polymer compounds. It has an extremely good effect on improving the wet fastness of natural fiber dyed products such as cotton yarn (cloth), Rayon, Silk and other general cellulose fibers. After the product is fixed, there is very little change in hue and decrease in fastness to sunlight. Especially, it has obvious upward function on the fastness to chlorine resistance (20PPM strong chlorine test).

Send Inquiry

Product Detail

Product Tags

Specification

Composition
Sodium carbonate 13% CAS	497-19-8
Sodium metasilicate pentahydrate 16% CAS	10213-79-3, etc. (environmentally friendly products without APEO)
Character
Appearance	white particles
Main properties	This product is a new type of alkali agent, which has the advantages of low dosage and low dust. At the same time, it has the same coloring rate and color fastness as soda ash.
Physical and chemical properties
Appearance	white physical state: granular solid
Odor: odorless solubility	it can be melted with cold water at room temperature.

Safety Measures

Hazard
Hazard overview
Odor: no odor
Harm: This product is a white solid particle, which is not harmful to skin contact, but harmful if swallowed.
Health hazards
Swallowing: it has a certain effect on the intestines and stomach.
Environmental effect
Hazard rating (NFPA): 0 very small: 1 mild: 2 mild: 3 severe: 4 very severe:
Water body 1
Atmospheric 0
Soil 1
Special hazard none

First aid measures
If you feel unwell, wash your eyes immediately with clean water for at least 15 minutes.
Skin contact: rinse immediately with flowing water.
Inhalation: This product is non-volatile and has no effect on respiratory tract.
Ingestion: rinse your mouth with plenty of water immediately. If you feel continuous discomfort, you should go to the hospital in time.

Emergency treatment of leakage
Emergency treatment personal protection: avoid contact with eyes and wear appropriate protective articles when using.
Surrounding environment protection: restrict irrelevant personnel (non production personnel) from entering the leakage area, and collect the scattered materials in closed containers as far as possible. The site shall be cleaned and washed with water before being put into the designated wastewater system.

Storage & Transportation

Handling and storage
Handling precautions.
Light loading and unloading shall be carried out in the process of handling, so as to prevent a large amount of material leakage caused by package rupture.
Storage precautions.
Store in a cool, ventilated and dry warehouse for one year.

Protective measures
Workshop hygiene standard.
Chinese MAC (mg / ㎡) meets the production standards of additives industry.
MAC of former Soviet Union (mg / ㎡) / TVL-TWA OSHA USA / TLV-STEL ACGIH USA.
Detection method: pH value determination: use the national standard pH value test paper to determine.
The engineering control operation room and storage room shall be well ventilated, and the materials shall not be stored open.
Operation precautions: Do not stick materials to your eyes. Keep proper ventilation conditions during production and use, and wash thoroughly after operation.

Storage and transportation
1. Transport as non-dangerous goods.
2. 25 Kgs. net woven bags.
3. The storage period is 12 months. Place in a cool and ventilated environment.